Tutco :: DHB & DB Series

The following diagram illustrates how to solve for watts, ohms, volts, or amps using Ohm's Law. Click to enlarge.

Fill in any two values to determine the other two:

°F = (9/5) × °C + 32

°C = (°F - 32) × (5/9)

Enter a value and select units to convert between

Calculate the electrical power, flow rate or temperature requirement as follows:

SCFM = airflow in standard cubic feet per minute

ΔT = temperature rise in F° from the inlet to the exhaust

Watts = SCFM x ΔT/3

Fill in two values to determine the third.

Three Phase Unit

Line Current = Wattage / (Voltage * √3)

Product Details

DHB & DB Series - Features & Benefits

50 or 60 Hz design
High voltage and low voltage terminal boards to interconnect heater with remote panel
Grounding lugs
Automatic limit switch for primary over temperature protection
Manual reset limit swithc for secondary over temperature protection
Left hand offset control box