Tutco :: Belly Band

The following diagram illustrates how to solve for watts, ohms, volts, or amps using Ohm's Law. Click to enlarge.

Fill in any two values to determine the other two:

°F = (9/5) × °C + 32

°C = (°F - 32) × (5/9)

Enter a value and select units to convert between

Calculate the electrical power, flow rate or temperature requirement as follows:

SCFM = airflow in standard cubic feet per minute

ΔT = temperature rise in F° from the inlet to the exhaust

Watts = SCFM x ΔT/3

Fill in two values to determine the third.

Three Phase Unit

Line Current = Wattage / (Voltage * √3)

Product Details

Belly Band - Features & Benefits

Flexible and Easy to Install
Stainless Steel Construction
Provides Superior Heat Sink
Rapid Heat Up Capabilities
Cost-effective Performance
Capable of Passing a 3000VDC Hypot Test with < .01 mA Leakage While Fully Submerged
UL Rated

Built with Oil Resistant PVC Lead Wire Which is Superior to Neoprene Leads when Oil is Present
Can Operate in a Variety of Environments Including:
- Underwater
- Inside a Block of Ice
- Saltwater
- Open Air

Belly Bands can be modified to meet the demands of virtually any special application.

Voltage Rating	Up to 600V
Max surface temperature	150°C (300°F)
Max watt density	0.75W/cm2 (4.5/in2) of circumference
Minimum diameter	150mm (6 Inch)
Width	19mm (3/4 Inch)
Sheath Material	304 Stainless Steel
Clamping Style	Quick Release Clamp, 301 SS Strap with 401 SS Hex Screw Head
Termination	Single Pass: Leads on each side of the gap, exiting on the thickness. Double Pass & Narrow Double Pass: Both leads at one side of the gap, exiting on the thickness.
Leads	PVC Insulation, 18 GA, 600V, 105°C
Ground Wire	Optional, welded to strap.